How to build your own “smoke-free” fireplace

Image for article titled Build Your Own 'Smokeless' Foyer

Photo: The feast of images (Shutterstock)

Hearths are often considered an inviting part of outdoor spaces, but sometimes the smoke they create is less than inviting. Whether the lingering smell on your coat or in your hair is a nuisance, or you’re the person who always seems to be sitting where the wind blows the smoke, reducing the amount can improve the quality of your evening around the fire. . AAlthough there is no completely smokeless fire, s“smoke-free” fireplaces utilize a double-chamber system for fuel combustion that produces much less smoke.

How it works smoke-free household work?

LikeSmokeless hearth works by circulating air through a double-walled container in which a fire can be built. First designed by the Dakota peopleThis simple and ingenious engineering trick can be emulated in our contemporary fire pit designs by modifying an existing backyard pit or building a new one.

The air heats up as it passes through the outer wall and more of the fuel is burned at this higher temperature, resulting in less residue, ash and smoke being emitted. The downside is that a hotter fire will tend to send heat upwards faster than it goes outwards, so it doesn’t have as much radiant heat as a traditional fireplace; but IIt’s still got the dancing flames and the warm lightand you will still feel a little warmth Fire.

What you need to make a smoke free fireplace

For this project you will need:

  • Adrill with a metal drill
  • EEither an existing fireplace with a metal ring or a 20-quart and a 16-one liter jar (more a lid for the 20-liter jar)
  • A jigsaw with a metal blade
  • A strong pair of metal shears or one grinder (to build a new smokeless fireplace without the stone structure)
  • A metal file (to blunt the edges of your holes and cut metal parts)
  • A heavy pair of metal work gloves
  • Ssafety glasses
  • Ear protection

How to edit a existing traditional fireplace

For your existing pit, remove the metal ring of the pit and widen the base so it rests about an inch outside of the metal hearth ring, leaving about enough space for your finger to fit between the outer wall of your pit and the ring is enough to allow air to circulate around the outside of it.

Once you have laid your first layer of stone or brickyou will need to create certain spaces to allow air to circulate in the space. Some people spread their stones at the base to make an intake hole about every foot around the circumference of your pit. If you’re using bricks, you can use a half brick with a space on each side for every two or three bricks. Then you can rebuild the exterior wall of your fireplace without any gaps.

Then you will need to drill holes in the focus ring. Use your drill and metal bit to drill a hole at each foot, about an inch from the top edge of your metal ring. You must use your safety equipment for this part to avoid metal shards. Use your file to smooth the edges of the holes you drilled and remove any remaining burrs. PPut your ring back in your hearth, and you are ready.

How to build a new smokeless fireplace

To build a new smokeless metal fireplace, grab the lid of your 20-quart jar and use the bottom of your smaller jar to draw a circle in the center of the underside of the lid with a permanent marker. Put on your safety gear and use your grinder with a cut-off blade, drill, and jigsaw with a metal blade (or drill and metal shears) to cut out the middle of the lid of the larger jar. Use the file to smooth the edges of your hole, and your smaller pot should fit inside the lid of the larger pot, leaving about an inch of space in between.

Then drill holes every three inches or so, one inch from the top of the smaller pot and one inch from the bottom of your larger pot. Use your metal file to remove burrs and smooth the edges of the holes. Then, when you put the two pots together, you will have a small smokeless stove. Make sure that when you use your stove, you do not place it on a surface vulnerable to heat so as not to start a fire outside your fireplace.

This method will work with any pair of containers with a size ratio similar to a 20- at 16-quarter report. For a larger model, metal trash cans will work, as well.

Leave a Comment